Wall Systems |operable walls|folding walls|automatic walls|folding doors Skyfold wall systems blend themselves to practically any surroundingcreated by the architect and interior designer. The various finishes include fabric, stainless steel, melamine, wood veneers, and vinyl. These are not the only finishes that are available for the wall systems. You can also choose from markerboard, custom murals, etc... a great variety is available to you. Our Skyfold dealers, engineers and technicians are most willing to personally assist you and provide you with specific details for your wall systems design in its earliest stages. For your consideration and to further help you with your design we have put together some helpful design tips. Skyfold wall systems shall be visibly flat and rigid in the down (closed) position. There shall be no exposed hinges, brackets, screws, and no part of the mechanical system shall be visible when the operable wall is in the down (closed) position and the wall systems have edges shall be right angled, with a minimum radius not more than 1/16” (1.6mm). All of the panels shall be rectangular, nominally of the same size, unless requested otherwise by the architect. Wall sytems joints between panel, vertical and horizontal, shall be no more than approximately _” (12.7mm) wide. The company requests that you submit shop drawings showing complete layout of operable wall systems based on field verified dimensions. The drawings shall include dimensional relationship to adjoining work. Include details indicating materials, finishes, tolerances, methods of attachment to building steel and electrical requirements. |
