Design Tips
Since Skyfold Mirage
® is a type of modular system, the following pages are to be used as a quick reference when determining space requirements for your Skyfold Mirage
® needs.
These pages also indicate the parameters which will enable you to maximize the Skyfold Mirage
® System in the most cost efficient way.
Example 1:
The customer requires an 11’-4” (3455mm) finished ceiling height.
If the customer drops to an 11’-3” (3430mm) height, two (2)
rows of panels are eliminated, thus reducing the cost of the wall.
There are no restrictions on the length of wall for the Skyfold Mirage
®.
Our maximum ceiling height 16’-0” (4875mm).
It is more economical for the customer if the wall lengths stay within increments of 12’-0” (3660mm) without going over.
Example 2:
24’ (7315mm) long wall instead of 25’ (7620mm) - 2 panels on the length instead of 3
60’ (18290mm) long wall instead of 61’ (18595mm) - 5 panels on the length instead of 6
>> Incorporating these guidelines will result in substantial savings to the customer.
The Skyfold Mirage
® uses our compact drive system. For ease of design, installation and maintenance, this motor assembly mounts directly above the wall.
Isometric view
(click thumbnail to enlarge)
;)
