Easy and Efficient
- Simple turnkey operation
- No physical effort required
- Room configuration changed in minutes
- Retracts quietly and effortlessly
- Damaged sections easily replaced
- REVIT drawings available for ease of design integration
Learn more
Exceptional Safety Features
- Operated by two push button switches controlled by a single three position key switch
- Uses aircraft grade wire cables sized for a high safety factor
- Each cable is lifted by a separate cable drum
- Bottom leading edge equipped with an obstruction sensor
Convenient and Efficient Use of Space
- Fold vertically and store in the ceiling, often an unused space
- Does not use floor space for storage pockets
- Can be installed virtually anywhere...in between beams, around ducts and pipes
Durable
- Panels never handled during operation
- Panels do not experience the usual wear and tear
- Will outlast conventional wall systems
Aesthetically Pleasing
- Seals are internal
- No unsightly wall and floor tracks
- Walls can be installed to meet at 90°
- No unsightly side pocket doors
- No visible hinges or hardware
|
Outstanding Acoustics
- Exceptional STC ratings
Learn more
- Pliable seals that seal tightly against most surfaces
| Product |
STC |
Rw |
NRC |
SAC |
Weight |
| Classic 51 |
51  |
51 |
- |
- |
7.0 lbs/ft2 (34.2 kg/m2) |
| Classic 55 |
55 |
54 |
- |
- |
7.6 lbs/ft2 (37.1 kg/m2) |
| Classic Elite |
57 |
56 |
- |
- |
9.1 lbs/ft2 (44.1 kg/m2) |
| Classic NR |
50 |
49 |
0.65 |
0.65 |
7.5 lbs/ft2 (36.6 kg/m2) |
Weights are based on partitions
24'-0" (7315mm) long x 14'-1" (4290mm) high.
Cost-Effective and Lightweight
- Modular system that allows for design flexibility
- Not expensive to replace damaged panels
- Weighs 7.0 to 9.1 lbs per square foot (34.2 to 44.1 kg/m2, compared to 10 to 12 lbs (48.8 to 58.6kg) with conventional walls
- Light weight resulting in savings in structural steel
- Even load exerted on structure, no load concentrations or shifting loads
- The drive system is mounted to the same structure as the partition, further saving in steel costs
Available in a Variety of Finishes
- Vinyl, fabric, specialty metals, plastic laminates, marking surfaces, wood veneer, and more
|
